Product Description
LYMC Supply Customized Professional Machining Steel Spur Gear For High Industrial Slew Gear
There are many types of gears such as spur gears, helical gears, bevel gears, worm gears, gear rack, etc. These can be broadly classified by looking at the positions of axes such as parallel shafts, intersecting shafts and non-intersecting shafts.
It is necessary to accurately understand the differences among gear types to accomplish necessary force transmission in mechanical designs. Even after choosing the general type, it is important to consider factors such as: dimensions (module, number of teeth, helix angle, face width, etc.), standard of precision grade (ISO, AGMA, DIN), need for teeth grinding and/or heat treating, allowable torque and efficiency, etc.
Spur Gear
Gears having cylindrical pitch surfaces are called cylindrical gears. Spur gears belong to the parallel shaft gear group and are cylindrical gears with a tooth line which is straight and parallel to the shaft. Spur gears are the most widely used gears that can achieve high accuracy with relatively easy production processes. They have the characteristic of having no load in the axial direction (thrust load). The larger of the meshing pair is called the gear and smaller is called the pinion.
Helical Gear
Helical gears are used with parallel shafts similar to spur gears and are cylindrical gears with winding tooth lines. They have better teeth meshing than spur gears and have superior quietness and can transmit higher loads, making them suitable for high speed applications. When using helical gears, they create thrust force in the axial direction, necessitating the use of thrust bearings. Helical gears come with right hand and left hand twist requiring opposite hand gears for a meshing pair.
Gear Rack
Same sized and shaped teeth cut at equal distances along a flat surface or a straight rod is called a gear rack. A gear rack is a cylindrical gear with the radius of the pitch cylinder being infinite. By meshing with a cylindrical gear pinion, it converts rotational motion into linear motion. Gear racks can be broadly divided into straight tooth racks and helical tooth racks, but both have straight tooth lines. By machining the ends of gear racks, it is possible to connect gear racks end to end.
Bevel Gear
Bevel gears have a cone shaped appearance and are used to transmit force between 2 shafts which intersect at 1 point (intersecting shafts). A bevel gear has a cone as its pitch surface and its teeth are cut along the cone. Kinds of bevel gears include straight bevel gears, helical bevel gears, spiral bevel gears, miter gears, angular bevel gears, CHINAMFG gears, zerol bevel gears and hypoid gears.
Screw Gear
Screw gears are a pair of same hand helical gears with the twist angle of 45° on non-parallel, non-intersecting shafts. Because the tooth contact is a point, their load carrying capacity is low and they are not suitable for large power transmission. Since power is transmitted by the sliding of the tooth surfaces, it is necessary to pay attention to lubrication when using screw gears.
Worm Gear
A screw shape cut on a shaft is the worm, the mating gear is the worm wheel, and together on non-intersecting shafts is called a worm gear. Worms and worm wheels are not limited to cylindrical shapes. There is the hour-glass type which can increase the contact ratio, but production becomes more difficult. Due to the sliding contact of the gear surfaces, it is necessary to reduce friction. For this reason, generally a hard material is used for the worm, and a soft material is used for worm wheel. Even though the efficiency is low due to the sliding contact, the rotation is smooth and quiet. When the lead angle of the worm is small, it creates a self-locking feature.
Internal gear
Internal gears have teeth cut on the inside of cylinders or cones and are paired with external gears. The main use of internal gears are for planetary gear drives and gear type shaft couplings. There are limitations in the number of teeth differences between internal and external gears due to involute interference, trochoid interference and trimming problems. The rotational directions of the internal and external gears in mesh are the same while they are opposite when 2 external gears are in mesh.
|
Product name |
Spur Gear & Helical Gear & Gear Shaft |
|
Materials Available |
Stainless Steel, Carbon Steel, Brass, Bronze, Iron, Aluminum Alloy etc |
|
Heat Treatment |
Quenching & Tempering, Carburizing & Quenching, High-frequency Hardening, Carbonitriding…… |
|
Surface Treatment |
Carburizing and Quenching,Tempering ,Tooth suface high quenching Hardening,Tempering |
|
BORE |
Finished bore, Pilot Bore, Special request |
|
Processing Method |
Molding, Shaving, Hobbing, Drilling, Tapping, Reaming, Manual Chamfering, Grinding etc |
|
Pressure Angle |
20 Degree |
|
Hardness |
55- 60HRC |
|
Size |
Customer Drawings & ISO standard |
|
Package |
Wooden Case/Container and pallet, or made-to-order |
|
Certificate |
ISO9001:2008 |
|
Machining Process |
Gear Hobbing, Gear Milling, Gear Shaping, Gear Broaching, Gear Shaving, Gear Grinding and Gear Lapping |
|
Applications |
Toy, Automotive, instrument, electrical equipment, household appliances, furniture, mechanical equipment,daily living equipment, |
|
Advantages |
1. Produce strictly in accordance with ANSI or DIN standard dimension |
Product Process
Application:
About Us:
HangZhou MC Bearing Technology Co.,Ltd (LYMC),who is manufacture located in bearing zone, focus on Slewing bearing, cross roller bearing and pinion,Dia from 50mm-8000mm, Our team with technical and full experience in the bearing industry.
*Professional in researching, developing, producing & marketing high precision bearings for 16 years;
*Many series bearings are on stock; Factory directly provide, most competitive price;
*Advanced CNC equipment, guarantee product accuracy & stability;
*One stop purchasing, product include cross roller bearing, rotary table bearing, robotic bearing, slewing bearing, angular contact ball bearing, large and extra large custom made bearing, diameter from 50~9000mm;
*Excellent pre-sale & after sale service. We can go to customers’ project site if needed.
*Professional technical & exporting team ensure excellent product design, quotation, delivering, documentation & custom clearance.
Our Service:
FAQ:
1.Q: Are you trading company or manufacturer ?
A: We are professional slewing bearing manufacturer with 20 years’ experience.
2.Q: How long is your delivery time?
A: Generally it is 4-5 days if the goods are in stock. or it is 45 days if the goods are not in
stock, Also it is according to quantity.
3.Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample, it is extra.
4.Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance, balance before shipment.
5.Q: Can you provide special customization according to the working conditions?
A: Sure, we can design and produce the slewing bearings for different working conditions.
6.Q: How about your guarantee?
A: We provide lifelong after-sales technical service.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Mining, Petroleum, Automatic,Excavator,Crane, |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | External Gear |
| Toothed Portion Shape: | Helical Bevel Gear |
| Material: | Stainless Steel |
| Type: | Non-Circular Gear |
| Customization: |
Available
|
|
|---|
What are the signs that indicate a need for worm wheel replacement or maintenance, and how can they be diagnosed?
Proper diagnosis of worm wheel condition is crucial for determining whether replacement or maintenance is necessary. Here’s a detailed explanation of the signs indicating a need for worm wheel replacement or maintenance and how they can be diagnosed:
- Excessive Wear: Excessive wear on the worm wheel can be identified by visual inspection or measurement. Signs of wear include pitting, scoring, or surface roughness on the teeth. A worn worm wheel may exhibit a change in tooth profile or a reduction in tooth thickness. Regular inspections and measurements of the gear teeth can help diagnose excessive wear and determine if replacement or maintenance is required.
- Abnormal Noise or Vibration: Unusual noise or vibration during operation can indicate issues with the worm wheel. Excessive wear, misalignment, or damage to the gear teeth can cause irregular gear meshing, resulting in noise or vibration. Monitoring and analyzing noise and vibration levels using sensors and diagnostic tools can help diagnose the source of the problem and determine if maintenance or replacement of the worm wheel is necessary.
- Increased Backlash: Backlash refers to the clearance between the teeth of the worm and the worm wheel. An increase in backlash can indicate wear, tooth damage, or misalignment of the worm wheel. Excessive backlash can result in reduced efficiency, decreased positional accuracy, and increased noise. Backlash can be diagnosed by measuring the rotational play or movement between the worm and the worm wheel. If the backlash exceeds acceptable limits, it may indicate the need for maintenance or replacement.
- Reduced Efficiency or Performance: A decrease in the overall efficiency or performance of the mechanical system may suggest issues with the worm wheel. Reduced efficiency can be caused by various factors, including wear, misalignment, or damage to the gear teeth. Monitoring key performance indicators such as power consumption, speed, or torque can help identify any significant changes that may point to problems with the worm wheel. If the efficiency or performance drops below acceptable levels, maintenance or replacement may be necessary.
- Leakage or Contamination: Leakage of lubricant or the presence of contamination around the worm wheel can indicate seal failure or damage to the gear housing. Inspecting the gear housing for signs of oil leakage, debris, or foreign particles can help diagnose potential issues. If the worm wheel is not adequately lubricated or if contaminants are present, it can lead to accelerated wear, increased friction, and reduced gear life. Addressing the root cause of the leakage or contamination is essential, and it may involve maintenance or replacement of the worm wheel components.
- Irregular Motion or Positioning: If the mechanical system exhibits irregular motion, inconsistent positioning, or unintended movements, it may indicate problems with the worm wheel. Misalignment, wear, or damage to the gear teeth can cause irregular gear meshing, resulting in unpredictable motion or positioning errors. Monitoring and analyzing the system’s motion or positional accuracy can help diagnose any abnormalities that may require maintenance or replacement of the worm wheel.
It’s important to note that proper diagnosis of worm wheel condition often requires a combination of visual inspection, measurement, analysis of sensor data, and expertise in gear systems. Regular inspections, preventive maintenance, and monitoring of key performance indicators can help detect early signs of issues and determine the appropriate course of action, whether it involves maintenance or replacement of the worm wheel.
How does the design of worm wheels impact their performance in different environments?
The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:
- Tooth Profile: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
- Material Selection: The choice of material for worm wheels is crucial for their performance in different environments. Worm wheels can be made from various materials, including steel, bronze, brass, or specialized alloys. Each material offers different properties such as strength, wear resistance, corrosion resistance, and self-lubrication. The selection of the appropriate material depends on factors such as the operating conditions, anticipated loads, and environmental factors. For example, in applications where corrosion resistance is essential, a stainless steel or corrosion-resistant alloy may be chosen to ensure long-term performance in harsh environments.
- Lubrication and Sealing: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
- Heat Dissipation: In environments where high temperatures are present, the design of worm wheels should consider heat dissipation mechanisms. Excessive heat can lead to premature wear, reduced efficiency, and potential damage to the gear system. The design may include features such as cooling fins, heat sinks, or ventilation channels to facilitate heat dissipation and maintain optimal operating temperatures. Proper heat dissipation design ensures the longevity and reliability of worm wheels in high-temperature environments.
- Noise and Vibration Control: The design of worm wheels can incorporate features to control noise and vibration, which are particularly important in certain environments. Modifications to the tooth profile, manufacturing tolerances, or the addition of damping elements can help reduce noise and vibration generation. In noise-sensitive environments or applications where excessive vibration can affect precision or stability, the design should prioritize noise and vibration control measures to ensure smooth and quiet operation.
- Environmental Factors: The design of worm wheels should consider specific environmental factors that can impact their performance. These factors may include temperature extremes, humidity, corrosive substances, abrasive particles, or even exposure to outdoor elements. The design may incorporate protective coatings, specialized materials, or enhanced sealing mechanisms to mitigate the effects of these environmental factors. Considering and addressing the specific environmental challenges helps ensure optimal performance and longevity of worm wheels in different environments.
By carefully considering the design aspects mentioned above, worm wheels can be tailored to perform reliably and efficiently in different environments. The design choices made for tooth profile, material selection, lubrication, heat dissipation, noise and vibration control, and addressing environmental factors are essential for optimizing the performance and durability of worm wheels in their intended applications.
What are the signs that indicate a need for worm wheel replacement or maintenance, and how can they be diagnosed?
Proper diagnosis of worm wheel condition is crucial for determining whether replacement or maintenance is necessary. Here’s a detailed explanation of the signs indicating a need for worm wheel replacement or maintenance and how they can be diagnosed:
- Excessive Wear: Excessive wear on the worm wheel can be identified by visual inspection or measurement. Signs of wear include pitting, scoring, or surface roughness on the teeth. A worn worm wheel may exhibit a change in tooth profile or a reduction in tooth thickness. Regular inspections and measurements of the gear teeth can help diagnose excessive wear and determine if replacement or maintenance is required.
- Abnormal Noise or Vibration: Unusual noise or vibration during operation can indicate issues with the worm wheel. Excessive wear, misalignment, or damage to the gear teeth can cause irregular gear meshing, resulting in noise or vibration. Monitoring and analyzing noise and vibration levels using sensors and diagnostic tools can help diagnose the source of the problem and determine if maintenance or replacement of the worm wheel is necessary.
- Increased Backlash: Backlash refers to the clearance between the teeth of the worm and the worm wheel. An increase in backlash can indicate wear, tooth damage, or misalignment of the worm wheel. Excessive backlash can result in reduced efficiency, decreased positional accuracy, and increased noise. Backlash can be diagnosed by measuring the rotational play or movement between the worm and the worm wheel. If the backlash exceeds acceptable limits, it may indicate the need for maintenance or replacement.
- Reduced Efficiency or Performance: A decrease in the overall efficiency or performance of the mechanical system may suggest issues with the worm wheel. Reduced efficiency can be caused by various factors, including wear, misalignment, or damage to the gear teeth. Monitoring key performance indicators such as power consumption, speed, or torque can help identify any significant changes that may point to problems with the worm wheel. If the efficiency or performance drops below acceptable levels, maintenance or replacement may be necessary.
- Leakage or Contamination: Leakage of lubricant or the presence of contamination around the worm wheel can indicate seal failure or damage to the gear housing. Inspecting the gear housing for signs of oil leakage, debris, or foreign particles can help diagnose potential issues. If the worm wheel is not adequately lubricated or if contaminants are present, it can lead to accelerated wear, increased friction, and reduced gear life. Addressing the root cause of the leakage or contamination is essential, and it may involve maintenance or replacement of the worm wheel components.
- Irregular Motion or Positioning: If the mechanical system exhibits irregular motion, inconsistent positioning, or unintended movements, it may indicate problems with the worm wheel. Misalignment, wear, or damage to the gear teeth can cause irregular gear meshing, resulting in unpredictable motion or positioning errors. Monitoring and analyzing the system’s motion or positional accuracy can help diagnose any abnormalities that may require maintenance or replacement of the worm wheel.
It’s important to note that proper diagnosis of worm wheel condition often requires a combination of visual inspection, measurement, analysis of sensor data, and expertise in gear systems. Regular inspections, preventive maintenance, and monitoring of key performance indicators can help detect early signs of issues and determine the appropriate course of action, whether it involves maintenance or replacement of the worm wheel.
editor by Dream 2024-05-07