China China Horizontal Worm Gearbox Reducer Wp Series Worm Gear Reducer Unit Gearboxes worm gearbox efficiency

Merchandise Description

China Horizontal Worm Gearbox Reducer WP Collection Worm equipment reducer device gearboxes

Parts:
1. Housing: Forged Iron
2. Gears: Worm Gears, 1 phase
three. Enter Configurations:
Reliable Enter Shaft
Motor Flange – IEC B5
4. Output Configurations:
Solid Output Shaft
Hollow Output Shaft

Attributes:
one. Distinct variants, both input and output shafts can be mounted horizontally or vertically

two. Compact structure

three. Direct generate or oblique drive available

4. Output could be sound shaft or hollow hole

Models & Variants:
WPA Series – Lower Enter Shaft
WPS Series – Higher Enter Shaft

WPDA Sequence – Reduced Enter Flange
WPDS Sequence – Higher Input Flange.
WPO Collection – Vertical Upward Output Shaft

WPX Collection – Vertical Downward Output Shaft

WPDO Collection – Vertical Upward Output Shaft, Enter Flange
WPDX Series – Vertical Downward Output Shaft, Input Flange 
Gearbox Parameters

Frame Measurement Heart Length Equipment Ratio
WPA40 40 10/1, 15/1, 20/1, 25/1, 30/1, forty/1, 50/1, sixty/1
WPA50 fifty
WPA60 60
WPA70 70
WPA80 eighty
WPA100 100
WPA120 one hundred twenty
WPA135 one hundred thirty five
WPA147 147
WPA155 155
WPA175 one hundred seventy five
WPA200 200

Item image:

Our organization :
one.A lot more than 35 several years knowledge in R&D and producing, export equipment motors & industrial gearboxes.
2. Standardization of the gearbox sequence
3. Sturdy design functionality for big energy & personalized gearboxes.
4.Large quality gearboxes and confirmed solutions supplier.
5.Strict quality handle method, stable quality.
6 Less than 2% of the top quality grievances.
7.Modular style, short shipping and delivery time.
eight.Rapid response & specialist providers.

Client browsing:

Our Services:

Pre-sale services 1. Select gear product.
two.Style and manufacture goods in accordance to clients’ special requirement.
three.Practice specialized personal for customers
Services in the course of promoting 1.Pre-check out and take merchandise ahead of delivery.
2. Aid clientele to draft solving strategies.
After-sale services 1.Support consumers to get ready for the first design scheme.
two. Practice the first-line operators.
three.Get initiative to get rid of the difficulty speedily.
four. Provide technological exchanging.

FAQ:
one.Q:What varieties of gearbox can you generate for us?
A:Major items of our company: UDL series pace variator,RV sequence worm equipment reducer, ATA collection shaft mounted gearbox, X,B series equipment reducer,
P collection planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred versions and 1000’s of requirements
2.Q:Can you make as per personalized drawing?
A: Indeed, we offer personalized service for clients.
3.Q:What is your conditions of payment ?
A: 30% Progress payment by T/T right after signing the deal.70% before shipping and delivery
4.Q:What is your MOQ?
A: 1 Set

If you have any demand for our merchandise make sure you truly feel free of charge to contact me.

US $80
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Customization:

###

Frame Size Center Distance Gear Ratio
WPA40 40 10/1, 15/1, 20/1, 25/1, 30/1, 40/1, 50/1, 60/1
WPA50 50
WPA60 60
WPA70 70
WPA80 80
WPA100 100
WPA120 120
WPA135 135
WPA147 147
WPA155 155
WPA175 175
WPA200 200

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
US $80
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Customization:

###

Frame Size Center Distance Gear Ratio
WPA40 40 10/1, 15/1, 20/1, 25/1, 30/1, 40/1, 50/1, 60/1
WPA50 50
WPA60 60
WPA70 70
WPA80 80
WPA100 100
WPA120 120
WPA135 135
WPA147 147
WPA155 155
WPA175 175
WPA200 200

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
worm reducer

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China China Horizontal Worm Gearbox Reducer Wp Series Worm Gear Reducer Unit Gearboxes     worm gearbox efficiencyChina China Horizontal Worm Gearbox Reducer Wp Series Worm Gear Reducer Unit Gearboxes     worm gearbox efficiency
editor by czh 2023-01-30